Vacuum Pumps

Airtech and Elmo Rietschle are the brands of rotary vane vacuum pumps we recommend most to our customers.

Airtech_ISO_logo               Airtech Category L Series Rotary Vane Vacuum Pump

L-Series Oil Lubricated Rotary Vane Vacuum Pumps

Airtech’s L-Series rotary vane oil-flooded vacuum pump is a real workhorse. Reliability and durability are ensured by its simple design. Our L-Series Pump has integral exhaust filters, vibration isolators, and composite vane material which promotes longevity. The Airtech pump has an operating capacity range of 7-460 CFM while obtaining an end vacuum of 0.5 Torr.

L-Series Models

  • L12 (0.75hp)
  • L21 (1hp)
  • L25 (1.5hp)
  • L40 (2hp)
  • L63 (3hp)
  • L100 (5hp)
  • L160B (5hp)
  • L160C (7.5hp)
  • L230B (7.5hp)
  • L250D (10hp)
  • L305 (12hp)
  • L400C (15hp)
  • L630C (25hp)
L-Series Features

  • Composite vane material for long life
  • Oil level sight glass
  • Vibraton isolators
  • Anti-suck back valve
  • Integral exhaust filters
  • TEFC high-efficiency tri-voltage motor
    (208-230-460V 50/60)
  • Exhaust pressure gauge
  • Wire mesh inlet screen
  • Spin-on oil filter
PDFDownload the L12 – L305
Installation and Operating Manual

Adobe Acrobat Required
2.01Mb, PDF File
PDFDownload the L400C – L630C
Installation and Operating Manual
Adobe Acrobat Required
517kb, PDF File

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Elmo Rietschle Vacuum Pumps

 

Elmo Rietschle - Vaccum Pumps

Elmo Rietschle – Vaccum Pumps

 

V-VC Oil Lubricated Vacuum Pumps

Elmo Rietschle - V-VC Oil Lubricated Vacuum Pumps

Elmo Rietschle – V-VC Oil Lubricated Vacuum Pumps

Volume flow
50 to 1,535 m³/hr
29.4 to 902.9 cfm

Oil flooded rotary vane vacuum pump with capacities ranging from 50 to 1,535 m³/hr (29.4 to 902.9 cfm) and an ultimate vacuum of 0.1 mbar abs. Flange motor, bearings on both sides of the rotor, oil/air heat exchanger are serial. The sizes of 150 m³/hr and bigger are equipped with fine mesh filter, vacuum non-return valve, gas ballast valve, protection cover and oil separator as standard.

Download Datasheet below

VC 50-150 PDF Icon                VC 200/300 PDF Icon

VC 202/303 PDF Icon             VC 400-1300 PDF Icon

 

C-Series Claw Vacuum Pumps

Elmo Rietschle - C-VLR 1000 - Claw Vacuum Pump

Elmo Rietschle – C-VLR 1000 – Claw Vacuum Pump

Volume flow
60 to 1140 m³/hr
35.3 to 671 cfm

High efficiency, dry and contact-free compression claw vacuum pump with capacities ranging from 60 to 1140 m³/hr (35.3 to 671 cfm). The maximum ultimate vacuum at continuous operation is up to 50 mbar (abs). Low maintenance, integrated air cooling without additional cooling medium, suitable for multiple applications. Flange mounted motors comply with DIN EN 60034, have IP 55 protection and insulation class F. Internal compression allows for low end pressure while using low power motors. At the same time the performance curve remains steady over its entire range. The C-VLR can be fitted with a frequency converter so that capacity and vacuum can be adjusted exactly to the requirements of the customer. Closed loop operation with inlet and outlet connected to the process is possible.

Download Datasheet below

C-VLR 60 – 500

Si UnitsPDF Icon   USCS unitsPDF Icon

C-VLR 1000

Si UnitsPDF Icon   USCS unitsPDF Icon

 

S-Series Screw Vacuum Pumps

Elmo Rietschle - S-VSI Series Screw Vacuum Pumps

Elmo Rietschle – S-VSI Series Screw Vacuum Pumps

Volume flow
100 to 360 m³/hr
58.8 to 211.8 cfm

Dry running, contact-free screw vacuum pumps with capacities of 100 to 360 m³/hr (58.8 to 211.8 cfm), ultimate vacuum 0.1 mbar (abs). Easy to service. Especially suitable for industrial applications like packaging or drying processes. Low running temperature due to the progressive graduation of the screw pitch.

Download Datasheet below

PDF Icon

 

 

US Equipment / Arnel Compressor - Contact Us

 

Contact our sales department at (800) 255-4731 or email us at sales@usequipmentco.com if you have questions or do not see what you are looking for.